A burst pipe can release hundreds of gallons of water into your home in a single hour, but the first few minutes decide how bad the damage gets. Here is what to do, in order. 1. Shut off the main water valve. Every homeowner should know where it is — usually near the water meter or where the main line enters the house. Turning it off stops the flow at the source. 2. Cut power if water is near electrical outlets, appliances or your breaker panel. If the panel itself is wet, do not touch it; keep away and wait for help. 3. Open faucets to drain the remaining water from the lines and relieve pressure. 4. Move furniture, electronics and valuables out of the affected area, and take photos of the damage for your insurance record before you start cleaning. 5. Start removing standing water with towels, a mop or a wet vacuum if it is safe to do so. Then bring in professionals to find the break, repair the line and dry the structure properly. For homeowners across the state, our team provides burst pipe repair in Pennsylvania — from locating the break to the finished repair and cleanup guidance. Knowing your shutoff valve location today is the cheapest insurance you will ever have. Check it before you ever need it.